QoS And Advanced
Posted: Mon Sep 05, 2011 7:16 amQoS is a concept to retain your server providing a stable service. To control the bandwidth or data stream pass through between client and server, click advanced setting button next to "QoS" on Network > Standard Routing.
Simply, you need to input User,Ip,From,To,QoS is fine. If Magic Router run as server mode (set in Coding > Router Mode > Server), and user name / password is entered in User.txt, then you can setup QoS for the user. If no user to define, use *.
QoS value will return if the first rule is matched. If none found, it will not control the QoS. Therefore we always add a last rule to control undetected user or ip with limited QoS. QoS is in terms of kByte.
*,*,00:00:00,23:59:59,10
If you do not enable QoS Mapping in advanced setting, it will get the default QoS ONLY. And if you enter nothing inside QoS, it will not control the QoS.
Simply, you need to input User,Ip,From,To,QoS is fine. If Magic Router run as server mode (set in Coding > Router Mode > Server), and user name / password is entered in User.txt, then you can setup QoS for the user. If no user to define, use *.
QoS value will return if the first rule is matched. If none found, it will not control the QoS. Therefore we always add a last rule to control undetected user or ip with limited QoS. QoS is in terms of kByte.
*,*,00:00:00,23:59:59,10
If you do not enable QoS Mapping in advanced setting, it will get the default QoS ONLY. And if you enter nothing inside QoS, it will not control the QoS.
- Page1c.JPG (26.93 KiB) Viewed 23469 times